Ultra-thin Indicator Light for Solenoid Valves Retro-fits Existing Applications DIN 43650 Form A, B and C

Canfield Connector’s Interposed Lighted Wafer (iLW) is a state of the art, electronic lighting indicator module for installation between a DIN type coil and it’s mating connector.   The ultra-thin iLW’s surface mount technology and high luminescence Gallium Arsenide LED allows it to retrofit existing applications or to be used in conjunction with unlighted connectors.  The iLW is MINI standard but also is available for Sub-Micro 8mm, Sub-Micro 9.4mm, DIN 43650 Form “A”/ISO 4400, and EN 175301-803:2000 retrofits.  It is NEMA 4 and IP 65 dust tight and water resistant and is not polarity dependent.  Designed to “sandwich” between the connector and the coil, the iLW can be installed several times without degrading the contact surfaces and operates in an ambient temperature range of   -20° to +90°C.d Connector is certified to ISO 9001 with design and the Series iLW is proudly manufactured in the USA to the highest quality standards. Complete specifications can be found at www.canfieldconnector.com or by calling Bob Howard at 330-758-8299 x 122.

About Canfield Connector

Canfield Connector is a manufacturer of interconnection devices, electronic timers, connectors, sensors, modules and specialty electronic devices targeted at the fluid power industry. Our Complete Quality Control Program (CQCP) protects our customers by assuring them of 100% test and inspection prior to shipment of all items produced at Canfield Connector, including electronic timers and interconnection devices. Most items are tested during the manufacturing process and again during final inspection, making our products double or triple tested for function prior to shipment. It is our goal to attain complete customer satisfaction. View all posts by Canfield Connector

You must be logged in to post a comment.

%d bloggers like this: