Series R5000 solenoid valve connector

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors. This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide. The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Features include the ability for the user to wire the connector into existing installations. Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit. The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation.

About Canfield Connector

Canfield Connector is a manufacturer of interconnection devices, electronic timers, connectors, sensors, modules and specialty electronic devices targeted at the fluid power industry. Our Complete Quality Control Program (CQCP) protects our customers by assuring them of 100% test and inspection prior to shipment of all items produced at Canfield Connector, including electronic timers and interconnection devices. Most items are tested during the manufacturing process and again during final inspection, making our products double or triple tested for function prior to shipment. It is our goal to attain complete customer satisfaction. View all posts by Canfield Connector

You must be logged in to post a comment.

%d bloggers like this: